21-14-01: Homogeniser and pasteuriser for cream
Homogenizer and pasteurizer set for cream. Have been producing together previously in the factory. Highlights pasteurizer: skid mounted pasteurizer for cream existing out of: centrifugal infeed pump for product (1,5 kW), balance tank and a heat exchanger with 4 sections (make: APV, regeneration, heat, cooling or reheating), centrifugal booster pump (3 kW), flowmeter and 2 hotwater sets (brazed heat exchangers, steam/hotwater, 2 hot water circulation pumps of 0,75 kW and 2 Bürkert steam regulation valves), holding tube (1,5'' pipe, ± 13 meter = 12 liter = 22 seconds @ 2.000 ltr/h), swing bend panel for infeed and oufeed lines (not all piping of swing bend panel connected) and controls (Siemens S7) with HMI screen and temperature recoder (Jumo). Temperature cycle: in (4°C) - regeneration - outlet to homogenizer (65°C) - regeneration - heating - holding - out (through swing bend panel) or regeneration - cooling (4°C) or reheating (45°C) by same section with manual stop valves. CIP cleanable. Highlights homogenizer: High pressure homogenizer. 2 stages with manual pressure control. 3 pistons, piston diameter: 35 mm and stroke: 57 mm. Stainless steel cladded. Connections: 1,5" DIN. Freestanding control panel. Including overpressure valve and bypass valve. Manometer on inlet. Manometer on first and second stage. Flow switch on cooling water. Connection for pulsation damper on inlet/outlet (damper itself excluded). Including operational manual and sparts list in English language.