Stork Sterideal-PUDD 7500
Tubular Sterilisater or pasteuriser, high pressure (up to 90bar!) Helical/spiral wound heat exchanger.
Used on Custard and desserts, The high pressure allows higher Starch content in the product/recipe.
Unit can also be used to heat treat pasteurize or sterilize (up to 145°C) other viscose pumpable product.
The line is multitube partly 6 tubes in 1 tube. The Hexial design give a better mix of the heat through the product compared to straight design tube in tube.
line consisting out of:
- Hexial (spiral) Tubular indirect heating, Pre-heating, Regeneration, heating, 3 x Cooling.
Allowing various in and output temperatures.
- Infeed system / supply unit - skid based (vessel cap.: 500 liter) with valves and sensors,
- Infeed Pump Twin screw pump Bornemann SLH125-98 (cap. 7,5 m3/h - 15 kW) pushing the product through the first section to the homogeniser
- High pressure pump / homogeniser Stork HL (motor 75 kW), up to 200bar
- Hot water circulation pump Fristam for regeneration section.
- Holding (15 sec @7.500 ltr/h),
- Interconnecting piping, Swingbend panel, piping, counter pressure valves for product
- Controls valves (Samson) for steam and icewater .
- Skid with swingbend panel, valve manifold, aseptic valve cross point recirculation – Filling machine
- Control panel with frequency converters and Siemens Simatic Net control.
- Lye-acid dosing system and small items like sensors partly missing."
