UHT unit with direct and indirect heating system.
2 temperature cycles:
Cream: 8,000ltr/h direct steam injection and cooling by flash cooler, temperature cycle: 4-75-135/145-75 (homogeniser)-8°C out.
Milk: 13,000ltr/h, indirect Tubular heat exchanger (multitube tube system).
Protein stabilizer at 95°C - 60 seconds and holding tube at 137°C for 4 seconds.
Output at 26°C.
Complete system with:
Balance tank with product pumps (Centrifugal pump Fristam 15kW and Lobbe pump APV model: DW5 11kW for cream) including valves and parts of the piping
54 Product Tubular heatexchangers multitubes length 6 mtr model: CMT various models: 25-75bar mounted in a frame together with steam water heatexchangers and holding tubes.
2 water circulation system with centrifugal pumps and balance tanks,
Product and steam valves and piping (not all piping complete).
Steam injector: Steam valve, Filter and steam injector stainless housing and Teflon insert with holes (with spare insert).
Flashvat with product outfeed pump, Vacuum pump and Air cooler-condenser mounted in a stainless steel frame with stairs, extreme robust design.
(speed of cream flow not exceeding 0.6m/s)
Plate cooler Make: Tecalsa.
Aseptic homogeniser
Make: APV-SPX model 132T-70,140X, 2 stage, variable speed can be placed up or downstage, pressure up to 250 Bar.
Pulstation dempers and Swing bend panel to select position of homogenizer.
Part of controls (need to be remade and cabling).
Big set of spare parts. PID available.
Circled in red on the PID is not present.
Circled in yellow on the PID has been replaced by a plate heat exchanger.
